• Three (3) Vend Stations
• Each Station Vends 4 Water Volumes
• Water Volumes ½ Liter to 6 Gallons
• Optional One or Two (2) Valve Vending
• Optional UV Flush
• Maxium Run Timer
• UV Lamp Shut Down and Lockout
• Metered or Timed Vending

The ESDI Model 110400-3-NOM Three Station Water Vending Machine Controller is a new electronics assembly that performs all of the functions necessary to control three (3) unsupervised bulk water vending machines. It incorporates many new features & options that make it compatible for most vending machine applications. Provides precise & reliable vending using a flow sensor, or internal timer. Requires no special equipment to program prices and retrieve sales data. The Model 110400-3 is assembled in the USA and manufactured in compliance with UL-508, and IEC Standard 1000-4-4 part 4 for EMI noise interference.

Features & Options Settings:

• Each Station Vends 4 Water Volumes. Volumes set & stored in memory using simple “Calibration Mode”.
• Water Volumes not Limited to Gallons. Calibrate any volume desired from ½ Liter to 6 Gallons per vend.
• Optional Two (2) Valve Dispensing For two speed vending, yielding faster vending with no overflow.
• Optional UV Flush Cycle removes accumulated hot water from UV lamp if idle time exceeds 30 minutes.
• Maximum Run Timer stops pump and terminates vending if the maximum vending if the maximum vending time is exceeded.
• Low Water Monitor blocks vending until water is once again present. (Set float above 5 gallons.)
• UV Lamp Shut Down and Lockout Input blocks vending until reset.
• Relay Contacts are Isolated and rated for any voltage up to 240 VAC, 3 Amps Max.
• Enclosure Size: 12” X 8” X 6”, Polycarbonate, NEMA 4 Indoor Rated.